You are here:products|hand crimping tool|l series crimping tool

bus bar processor bp-200

Rate this item
(2 votes)

bus bar processor bp-200

Feature:

 

Punch holes without burr,Cutting surface Smooth and Cutting angle accurately.it’s good for quick and repeat batch procession.
Four way valve control swich accurately guide to the position of punching ,bending and cutting.
Sate and firm pedal switch could control oil inlet and oil return.

3in1 busbar processor for cutting,punching and bending of copper busbar and aluminum busbar.It is designed for irregular sized bar prosession on Mid and small scaled transformer,switchboard box line or assembling site.Punch holes without burr,Cutting surface Smooth and Cutting angle accurately.it’s good for quick and repeat batch procession.Four way valve control swich accurately guide to the position of punching ,bending and cutting.Sate and firm pedal switch could control oil inlet and oil return.

sspecificationn

sspecificationn

Cutting,punching,horzontal bending,erective bending

  Input voltage/control voltage

   Single phase 50Hz,220v

  Rating working  oil pressure

  700kgf/cm2 (over pressure safety valve setting valeue)

  Dimension of moveable workbench

  890mm(L)x670mm(W)x940mm(H)

  Busbar cutting capability

  (Copper busbar/aluminum busbar)200*12mm

  Outlet force of busbar cutter

  200KN

  Cutting Range

  200mm(Width)X12mm(Thickness)

  Outlet force of puncher

  350KN

  The distance between  hole centre busbar edge

  70mm

  Distancefrom hole to sheet side

  110mm

  Punching capability-copper busbar/aluminum busbar

  Φ6-Φ20.5Max.Thickness):13mm

  Standard assembled punching dies

 3/8"(Φ10.5m),1/2"(Φ13.8m),5/8"(Φ17),3/4"(Φ20.5m)

  

  Outlet force of bender

  200KN

  Horizontal bending  capability

  200*12mm

 

3 in 1 multi-function  busbar machine bp-200

Features: cutting (CWC-200 or the CWC-200V), punching (CH-70), bending (CB-200A) form
Flow Table Size: 700mm (length) × 700mm (width) × 1200mm (H)
Input voltage: single 50HZ, 220V
Rated hydraulic: 700kgf/cm2 (UHP safety valve setting) 10000 (Psi)
Row machine cut output: 30 ton
Row range of cut (mm): copper and aluminum row of ≤ 200 × 12
Curved row of machine output: 30ton
Bending range (mm): copper and aluminum row of ≤ 200 × 12
Bending angle: 0 degrees -90 degrees
Punching machine output: 35 ton
The distance to the row of holes in the side: 110mm
Standard package punching die: Punch Φ7mm, Φ9mm, Φ10.5mm, Φ13.8mm, Φ17mm, Φ20.5mm
(Also die size can be customized according to demands long hole)
Weight: 210 kg

Product Details