battery powered pex crimping tool 4021

product code: battery powered pex crimper ez-1632

FEATURES:
The hydraulic unit incorporates an automatic which returns the piston into its starting position when the maximum operating pressure is reached.
AAA manual retraction allows the user to return the piston into the starting position in case of an incorrect crimp. The unit is equipped with a special brake when stops the forward motion of the piston ＆die when the trigger is release.
The unit is equipped with a double piston pump which is characterised by a rapid approach of the dies forwards the connector and a slow crimping motion.
The crimping head can be smoothly turned by 360°around the longitudinal axis in order to gain better access to tight corners and other difficult working areas.
Li-ion batteries do neither have a memory effect nor self discharge. Even after long periods of non operation the tools is always ready to operate. In addition we see a lower power weight ratio with 50% more capacity and shorter charging cycles compare to NIMH batteries.
A Temperature sensor makes the tool stop working automatically when the temperature over 60℃ under long time working, the fault signal sounds, it means the tool can’t continue work until the temperature reduced to the normal.

battery powered pex crimping tool 4021

Battery powered clamping tool
Clamping force: 60KN
Piston stroke: 17mm
Crimp/charge: 320 times
Crimping cycle: 3-6s
Battery voltage: 18V
Battery capacity: 2.0 Ah
Package: Steel case

battery powered pex crimping tool 4021

Accessories:
Crimping die:
H type: Φ 16. Φ 20. Φ 25. Φ 32mm
SV type: Φ 16. Φ 20. Φ 25mm
TH type: Φ 16. Φ 20. Φ 26. Φ 32mm

Battery: 2 PCS
Charger: 1 PC
O-ring for oil vat: 1 set
O-ring for safety valve: 1 set