battery cable crimper 5117

• For interchangeable dies.
• crimping head H type, rotates 360°.
• Two stage hydraulics.
• Quick motor stop.
• Motor stop and automatic retraction when crimp is complete.
• Electronic control and monitoring of crimping operation.
• Light diode for battery charge and maintenance control.
• High-performance 3.0Ah NIMH battery.

Crimping force: 120KN
Stroke: 20mm
Crimp/charge: 150 times(Cu 150mm2)
Crimping cycle: 4-12s (depend on the size of cable)
Voltage: 18V
Capacity: 3.0Ah
Charging time: 2 hours
Package: Steel case.
ACCESSORIES:
Crimping dies 16, 25, 35, 50, 70, 95, 120, 150, 185, 240, 300, 400mm2
Battery: 2 PCS
Charger: 1 PC
Sealing ring of cylinder: 1 set
Sealing ring of safety valve: 1 set

battery cable crimper Applications:

Cu compression cable lugs and compression joints (16-400mm² )

Al compression cable lugs and compression joints (10-300mm² )

Battery Powered crimping Tool 5117

battery cable crimper ez-400H

the functional characteristics :

1. The hydraulic unit incorporates and automatic retraction which returns the piston into its starting position when the maximum operating pressure is reached.
2. A manual retraction allows the user to return the piston into the starting position in case of an incorrect crimp. The unit is equipped with a special brake when stops the forward motion of the piston & die when the trigger is released.
3. The unit is equipped with a double piston pump which is characterized by a rapid approach of the dies forwards the connector and a slow crimping motion.
4. The crimping head can be smoothly turned by 360 degree around the longitudinal axis in order to gain better access to tight corners and other difficult working areas.
5. Li-ion batteries do neither a memory effect nor self discharge. Even after long periods of non operation the tool is always ready to operate. In addition we see a lower power weight ratio with 50% more capacity and shorter charging cycles compare to NIMH batteries.
6. A temperature sensor makes the tool stop working automatically when the temperature over 60 degree under long time working, the fault signal sounds, it means the tool can’t continue work until the temperature reduced to the normal.

 battery cable crimper 5117